Description
SPI FSP250-601U 250W 250 Watts Switching 1U IPC Server Workstation Power Supply
Features:
- Complied with ATX and ATX12V standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Remote ON/OFF function
- Internal 12V DC fan included
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL60950-1, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report)
Specification:
- Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C
- Humidity: 5 ~ 95% on operating and storage
- Dielectric Withstand: Input to frame ground 1800 VAC for 1 second
- Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all outputs
- Rise time: Less than 20msHold-up Time: 20ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25°C
- Dimensions (WxHxL): 205x100x40.5x205mm/.9×1.6x8in
Input Characteristics:
- Input Range: 90 ~ 264Vac (RMS), Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: 5A (RMS) @115Vac, 2.5A (RMS) @230Vac
- Inrush Current: 50A Max @115Vac, 80A Max @230Vac cold start
