SuperMicro P8SCT REV:1.01 Socket 775 Motherboard + Celeron D 2.8GHz CPU + 1U HS

Description

SuperMicro P8SCT REV:1.01 Socket 775 1U Motherboard + Intel Celeron D 2.8GHz CPU + Copper HS

Download latest Drivers/Manua/BIOS

Physical Stats Form Factor ATX Dimensions 12″ x 9.5 ” (30.5cm x 24.2cm) Processor/Cache CPU Single LGA775 (Prescott) Socket Supports an Intel® Pentium® 4processor 6×0 or 5×0 sequence on 90nm process ONLY (800MHz FSB) – including2MB Cache Extreme Edition Supports an Intel® Celeron® processor (533MHz FSB) with 256 KB L2 cache Hyper-Threading enabled System Bus 800 / 533 MHz system bus System Memory Memory Capacity Four 240-pin DIMM sockets Supports up to 4 GB DDR2 400MHz/533MHz unbuffered ECC/non-ECC memory Dual channel memory bus Memory Type DDR2 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs DIMM Sizes 256Mb, 512Mb, 1Gb densities 256MB, 512MB, 1GB SDRAM modules Total 128MB to 4GB memory capacity Memory Voltage 1.8V only Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel E7221 (Copper River) chipset ICH6R + PXH-V Serial ATA SATA controller integrated in Intel® ICH6R RAID 0, 1, 10 support IPMI Support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E) Card not included. Network Controllers 2x Broadcom BCM5721 Gigabit Ethernet Controllers Supports 10/100/1000BASE-T, RJ45 output Graphics Onboard integrated server quality video graphics in MCH Super I/O Winbond 83627HF chip Clock Generator ICH954101DF Input / Output Serial ATA Four Serial ATA ports Four SATA hard drives supported IDE One EIDE channel supports up to two UDMA / IDE devices Supports PIO Mode 4, and ATA/100 Floppy 1 Floppy controller; 1.44 MB, LAN 2x RJ45 LAN port USB 2x rear USB 2.0 / 1.1 ports 4x USB 2.0 / 1.1 internal headers for 4x ports VGA 1x VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1x Fast UART 16550 serial ports 1x serial header Parallel Port 1x ECP / EEP Parallel Port Chassis ( Optimized for P8SCT ) 1U Chassis SC513L-260 SC512L-260 SC813MT-300C SC811T-260 Important Note To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. Expansion Slots PCI-X 1x 64-bit 133MHz PCI-X (3.3V) slot PCI 5x 32-bit 33MHz PCI (5V) slots System BIOS BIOS Type 8Mb Flash EEPROM with Award BIOS® 49LF008A/SST BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 DMI 2.3 ACPI 1.0 (limited) BIOS Rescue hot keys USB Keyboard support SMBIOS 2.3 Management Software Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 SuperDoctor® III Watch Dog NMI Power Configurations ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery Internal/External modem remote ring-on PC Health Monitoring Voltage Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V FAN Total of five 3-pin fan headers 5x fans with tachometer monitoring Status monitor for speed control Low noise fan speed control Temperature Monitoring for CPU, chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) Support LED CPU / System Overheat LED Suspend-state indicator LED +5V standby alert LED Other Features Chassis intrusion header SDDC